FLUID-APP / FLUID APP / FLUIDAPPIndependent industrial supplier

Fluid-App Hydraulic Valves & Components

This is SUMY’s canonical Fluid-App hub for searches such as Fluid-App, Fluid App and Fluidapp. It combines database-backed products, manufacturer product families, model identification guidance, official technical references, catalogue access and RFQ support on one authoritative brand URL.

Fluid-App technical RFQ Open catalogue

01 / BRAND PROFILE

Fluid-App hydraulic valves and product range

Fluid-App Srl is an Italian hydraulic valve and component manufacturer based in Reggio Emilia. Its official range is organised around four main groups: in-line valves, cartridge valves, solenoid valves and hydraulic components. The in-line portfolio includes counterbalance/overcenter, check, pressure-compensated flow control, shuttle, divider/combiner, priority, sequence, pilot-operated check and direct-acting relief valves, together with CETOP manifolds. Cartridge products cover pressure, flow, directional and sealing functions in SAE or metric cavities, with manual, pneumatic and electrical actuation depending on the series.

02 / TECHNICAL SELECTION

How to select or replace a Fluid-App valve

Start with the complete part number and hydraulic function, then verify flow and pressure, port or cavity standard, mounting, direction of flow, pilot ratio or pressure setting where relevant, dimensions and seal compatibility. Fluid-App uses BSPP and SAE/NPTF connections across in-line families and SAE or metric cavities in cartridge families. For solenoid products, coil voltage and connector configuration must also match. Ratings vary by series, so the datasheet for the exact code should remain the final technical reference.

Fluid-App sourcing and technical RFQ

Send the complete model or part number, quantity and a clear nameplate/body photo. For replacement work, include the hydraulic function, pressure, flow, thread or cavity, pilot ratio, setting, dimensions, seals and, for electrical products, coil voltage and connector. This avoids matching a valve by appearance alone.

Product families

BSPP and SAE/NPTF in-line hydraulic valves
Counterbalance / overcenter load-control valves
Check, pilot-operated check and shuttle valves
Flow-control, pressure-compensated and divider/combiner valves
Relief, sequence and priority valves
SAE and metric cavity cartridge valves
Solenoid valves, coils, connectors and manifolds
Hydraulic test and system accessories

Applications

Load holding and controlled movement of cylinders or motors
Actuator speed and flow regulation
Overpressure protection with relief valves
Flow blocking and pilot-operated load holding
Pilot, brake and logic circuits using shuttle valves
Flow division, combination and priority control
Compact manifold circuits using cartridge and solenoid valves
Hose-burst and mobile load-safety applications

Industries

Agricultural machinery
Earth-moving equipment
Construction and lifting equipment
Ecology and municipal machinery
Transport equipment
Industrial vehicles
Industrial hydraulic installations

03 / PRODUCTS

Fluid-App products registered on SUMY

Fluid-App technical RFQ

VSP LEFT - Single acting pilot check valves with manual shut-off

VSP LEFT - Single acting pilot check valves with manual shut-off (VSP LEFT) is a Fluid-App hydraulic component designed to hold or control an actuator load and to prevent unintended movement until the required pilot or control condition is present. This page combines model identity, available ordering variants and published technical data in one product record.

VSP RIGHT - Single acting pilot check valves with manual shut-off

VSP RIGHT - Single acting pilot check valves with manual shut-off (VSP RIGHT) is a Fluid-App hydraulic component designed to hold or control an actuator load and to prevent unintended movement until the required pilot or control condition is present. This page combines model identity, available ordering variants and published technical data in one product record.

UFC NPTF - Check valves

UFC NPTF - Check valves (UFC NPTF) is a Fluid-App hydraulic component designed to permit hydraulic flow in the intended direction while blocking reverse flow. This page combines model identity, available ordering variants and published technical data in one product record.

UFC SAE - Check valves

UFC SAE - Check valves (UFC SAE) is a Fluid-App hydraulic component designed to permit hydraulic flow in the intended direction while blocking reverse flow. This page combines model identity, available ordering variants and published technical data in one product record.

SUD NPTF - Unidirectional flow control valve

SUD NPTF - Unidirectional flow control valve (SUD NPTF) is a Fluid-App hydraulic component used to regulate hydraulic flow and therefore influence actuator speed or flow distribution in the circuit. This page combines model identity, available ordering variants and published technical data in one product record.

SUD SAE - Unidirectional flow control valve

SUD SAE - Unidirectional flow control valve (SUD SAE) is a Fluid-App hydraulic component used to regulate hydraulic flow and therefore influence actuator speed or flow distribution in the circuit. This page combines model identity, available ordering variants and published technical data in one product record.

SUA NPTF - Unidirectional flow control valve

SUA NPTF - Unidirectional flow control valve (SUA NPTF) is a Fluid-App hydraulic component used to regulate hydraulic flow and therefore influence actuator speed or flow distribution in the circuit. This page combines model identity, available ordering variants and published technical data in one product record.

SUA SAE - Unidirectional flow control valve

SUA SAE - Unidirectional flow control valve (SUA SAE) is a Fluid-App hydraulic component used to regulate hydraulic flow and therefore influence actuator speed or flow distribution in the circuit. This page combines model identity, available ordering variants and published technical data in one product record.

SBD NPTF - Bidirectional flow control valves

SBD NPTF - Bidirectional flow control valves (SBD NPTF) is a Fluid-App hydraulic component used to regulate hydraulic flow and therefore influence actuator speed or flow distribution in the circuit. This page combines model identity, available ordering variants and published technical data in one product record.

SBD SAE - Bidirectional flow control valves

SBD SAE - Bidirectional flow control valves (SBD SAE) is a Fluid-App hydraulic component used to regulate hydraulic flow and therefore influence actuator speed or flow distribution in the circuit. This page combines model identity, available ordering variants and published technical data in one product record.

SBA NPTF - Bidirectional flow control valves

SBA NPTF - Bidirectional flow control valves (SBA NPTF) is a Fluid-App hydraulic component used to regulate hydraulic flow and therefore influence actuator speed or flow distribution in the circuit. This page combines model identity, available ordering variants and published technical data in one product record.

SBA SAE - Bidirectional flow control valves

SBA SAE - Bidirectional flow control valves (SBA SAE) is a Fluid-App hydraulic component used to regulate hydraulic flow and therefore influence actuator speed or flow distribution in the circuit. This page combines model identity, available ordering variants and published technical data in one product record.

Manifold SAE10/2 - Manifolds

Manifold SAE10/2 - Manifolds (Manifold SAE10/2) is a Fluid-App hydraulic component used to connect, distribute and organize hydraulic passages and mounted valve functions in a compact assembly. This page combines model identity, available ordering variants and published technical data in one product record.

Manifold SAE8/2 - Manifolds

Manifold SAE8/2 - Manifolds (Manifold SAE8/2) is a Fluid-App hydraulic component used to connect, distribute and organize hydraulic passages and mounted valve functions in a compact assembly. This page combines model identity, available ordering variants and published technical data in one product record.

CFR NPTF - Unidirectional flow control valve, pressure compensated

CFR NPTF - Unidirectional flow control valve, pressure compensated (CFR NPTF) is a Fluid-App hydraulic component used to regulate hydraulic flow and therefore influence actuator speed or flow distribution in the circuit. This page combines model identity, available ordering variants and published technical data in one product record.

CFR SAE - Unidirectional flow control valve, pressure compensated

CFR SAE - Unidirectional flow control valve, pressure compensated (CFR SAE) is a Fluid-App hydraulic component used to regulate hydraulic flow and therefore influence actuator speed or flow distribution in the circuit. This page combines model identity, available ordering variants and published technical data in one product record.

VSS - Shuttle valve

VSS - Shuttle valve (VSS) is a Fluid-App hydraulic component used to select one of two hydraulic pressure signals and route the available signal to a common outlet. This page combines model identity, available ordering variants and published technical data in one product record.

VUS - Check valves

VUS - Check valves (VUS) is a Fluid-App hydraulic component designed to permit hydraulic flow in the intended direction while blocking reverse flow. This page combines model identity, available ordering variants and published technical data in one product record.

VUD - Check valves

VUD - Check valves (VUD) is a Fluid-App hydraulic component designed to permit hydraulic flow in the intended direction while blocking reverse flow. This page combines model identity, available ordering variants and published technical data in one product record.

VUC - Check valves

VUC - Check valves (VUC) is a Fluid-App hydraulic component designed to permit hydraulic flow in the intended direction while blocking reverse flow. This page combines model identity, available ordering variants and published technical data in one product record.

VSS - Shuttle valve

VPS - Single acting pilot check valves

VPS - Single acting pilot check valves (VPS) is a Fluid-App hydraulic component designed to hold or control an actuator load and to prevent unintended movement until the required pilot or control condition is present. This page combines model identity, available ordering variants and published technical data in one product record.

VPS - Single acting pilot check valves

VSD - Direct acting sequence valve

VSD - Direct acting sequence valve (VSD) is a Fluid-App hydraulic component used to make a hydraulic function occur after the circuit reaches the required pressure condition. This page combines model identity, available ordering variants and published technical data in one product record.

Fluid-App catalogues and technical downloads

Fluid-App publishes a general catalogue and dedicated downloads for in-line valves, cartridge valves, solenoid valves and hydraulic components. For a specific model, use the complete part number so the corresponding datasheet and current series can be checked. SUMY-hosted documents, when available, are linked from the brand or product page.

Open catalogue Official manufacturer website

Have a Fluid-App model or part number?

Keep every prefix and suffix in the code. Common series families include BSA/BSC/BDA/BFA counterbalance valves, UFC/VBR/VSS check and shuttle products, M/MB relief valves, F flow controls, UC/CU2/CB2 cartridges and E2/E3/E6 electrical valves. The exact series datasheet remains the reference for interchangeability.

Fluid-App technical RFQ

Official technical references

Fluid-App FAQ

Are Fluid-App, Fluid App, Fluidapp and FluidApp the same brand?

Yes. These are common spelling variants that refer to the Italian Fluid-App brand. SUMY consolidates them on this canonical Fluid-App page rather than creating duplicate landing pages.

Where is Fluid-App made?

Fluid-App Srl is based in Reggio Emilia, Italy, and describes its hydraulic valve production as Italian-made.

What products does Fluid-App manufacture?

The manufacturer groups its range into in-line valves, cartridge valves, solenoid valves and hydraulic components, with functions including counterbalance, check, flow control, relief, sequence, priority, shuttle and divider/combiner.

What information is needed for a Fluid-App RFQ?

Send the complete part number, quantity, a clear photo and any known pressure, flow, port/cavity, voltage and application details. Complete codes reduce the risk of an incorrect match.

Where can I find the Fluid-App catalogue?

The manufacturer publishes a general catalogue plus separate downloads for in-line, cartridge, solenoid and hydraulic-component ranges. SUMY also links stored documents when available.

Can a visually similar hydraulic valve replace a Fluid-App valve?

Not safely by appearance alone. Function, pressure, flow, thread/cavity, direction, pilot ratio, setting, dimensions, seals and any electrical interface must be verified.

What is a Fluid-App counterbalance valve used for?

Counterbalance or overcenter valves are used for load control and to prevent uncontrolled movement of cylinders or hydraulic motors. Model selection depends on the circuit, load pressure, flow, pilot ratio and mounting.

Is SUMY an official Fluid-App representative?

SUMY only uses official or authorised status when a verifiable relationship is recorded. Otherwise it is presented as an independent industrial supplier and technical sourcing resource.

Fluid-App and its product names are trademarks of their respective owners. Unless a formal relationship is explicitly recorded, SUMY is an independent industrial supplier and does not claim to be an authorised Fluid-App representative. Final selection must be verified against the manufacturer datasheet and the actual hydraulic circuit.

Fluid-App Hydraulic Valves & Components

Fluid-App hydraulic valves and product range

How to select or replace a Fluid-App valve

Fluid-App sourcing and technical RFQ

Product families

Applications

Industries

Fluid-App products registered on SUMY

VSP LEFT - Single acting pilot check valves with manual shut-off

VSP RIGHT - Single acting pilot check valves with manual shut-off

UFC NPTF - Check valves

UFC SAE - Check valves

SUD NPTF - Unidirectional flow control valve

SUD SAE - Unidirectional flow control valve

SUA NPTF - Unidirectional flow control valve

SUA SAE - Unidirectional flow control valve

SBD NPTF - Bidirectional flow control valves

SBD SAE - Bidirectional flow control valves

SBA NPTF - Bidirectional flow control valves

SBA SAE - Bidirectional flow control valves

Manifold SAE10/2 - Manifolds

Manifold SAE8/2 - Manifolds

CFR NPTF - Unidirectional flow control valve, pressure compensated

CFR SAE - Unidirectional flow control valve, pressure compensated

VSS - Shuttle valve

VUS - Check valves

VUD - Check valves

VUC - Check valves

VSS - Shuttle valve

VPS - Single acting pilot check valves

VPS - Single acting pilot check valves

VSD - Direct acting sequence valve

Fluid-App catalogues and technical downloads

Have a Fluid-App model or part number?

Official technical references

Fluid-App FAQ

Fluid-App product architecture

IN-LINE VALVES

CARTRIDGE VALVES

SOLENOID VALVES

HYDRAULIC COMPONENTS